Home > Biology > Botany > Biotechnology: Principles and Processes
Biotechnology: Principles and Processes
On this page · 22 sections
- 01Syllabus map
- 02What biotechnology is
- 03Genetic engineering vs traditional hybridisation
- 04The first recombinant DNA: Cohen and Boyer, 1972
- 05Restriction enzymes: discovery and naming
- 06Palindromes and sticky ends
- 07Gel electrophoresis and elution
- 08Cloning vectors: plasmids and bacteriophages
- 09Features of a vector: ori, selectable marker, cloning sites
- 10Insertional inactivation: blue-white screening
- 11Vectors for plants and animals
- 12Competent host and gene transfer methods
- 13Isolation of genetic material
- 14Cutting DNA at specific locations and ligation
- 15PCR: amplifying the gene of interest
- 16Insertion of recombinant DNA into the host
- 17Obtaining the foreign gene product: bioreactors
- 18Downstream processing
- 19Table 1: Enzymes of recombinant DNA technology
- 20Table 2: Cloning vectors compared
- 21Table 3: The three steps of PCR
- 22Trap pairs: the confusions NEET tests
Recombinant DNA technology from NCERT Chapter 9: restriction enzymes, vectors, PCR, bioreactors and downstream processing, with the PYQs NEET keeps repeating.
Syllabus map
- NMC Unit: BIO-U09, Biotechnology and Its Applications. NCERT Chapter 9, Biotechnology: Principles and Processes (Class XII).
- Subtopics in this chapter (NCERT XII, Ch 9): principles of biotechnology; tools of recombinant DNA technology (restriction enzymes, cloning vectors, competent host); processes of recombinant DNA technology (isolation of DNA, cutting of DNA, amplification by PCR, insertion into the host, obtaining the foreign gene product, downstream processing).
- Subtopic checklist: (1) EFB definition of biotechnology; (2) genetic engineering and bioprocess engineering; (3) alien DNA, origin of replication and cloning; (4) Cohen and Boyer 1972, the first recombinant DNA; (5) restriction enzymes, Hind II, naming of enzymes; (6) palindromes and sticky ends; (7) gel electrophoresis and elution; (8) cloning vectors and copy number; (9) ori, selectable marker, cloning sites and pBR322; (10) insertional inactivation and blue-white screening; (11) Ti plasmid and retroviruses as vectors; (12) competent host and gene transfer methods; (13) isolation of DNA; (14) cutting of DNA and ligation; (15) PCR, its three steps and Taq polymerase; (16) insertion into the host and selection of transformants; (17) recombinant protein, continuous culture and bioreactors; (18) downstream processing.
- Extra information (beyond NCERT): the standard PCR temperatures, about 94-95°C for denaturation, about 50-60°C for primer annealing, and 72°C for extension by Taq polymerase. Everything else in this chapter is NCERT Chapter 9.
- Excluded topics: applications of biotechnology (Chapter 10: Bt cotton, gene therapy, transgenic animals, molecular diagnosis). Do not import their facts into this chapter.
- Estimated revision time: 11 minutes. Jump links: Syllabus Map, What Biotechnology Is, Genetic Engineering, First Recombinant DNA, Restriction Enzymes, Palindromes, Gel Electrophoresis, Cloning Vectors, Vector Features, Blue-White Screening, Plant and Animal Vectors, Competent Host, Isolation of DNA, Cutting and Ligation, PCR, Insertion and Selection, Foreign Gene Product, Downstream Processing, Tables, Trap Boxes, PYQs, Chapter Test.
What biotechnology is
Biotechnology deals with techniques of using live organisms or enzymes from organisms to produce products and processes useful to humans. Making curd, bread or wine are microbe-mediated processes and could be thought of as a form of biotechnology. However, the term is used in a restricted sense today, to refer to processes which use genetically modified organisms to achieve the same on a larger scale. In vitro fertilisation leading to a test-tube baby, synthesising a gene and using it, developing a DNA vaccine or correcting a defective gene are all part of biotechnology.
The European Federation of Biotechnology (EFB) has given a definition of biotechnology that encompasses both the traditional view and modern molecular biotechnology: 'The integration of natural science and organisms, cells, parts thereof, and molecular analogues for products and services'.
Among many, the two core techniques that enabled the birth of modern biotechnology are:
- (i) Genetic engineering: techniques to alter the chemistry of genetic material (DNA and RNA), to introduce these into host organisms and thus change the phenotype of the host organism.
- (ii) Bioprocess engineering: maintenance of sterile (microbial contamination-free) ambience in chemical engineering processes to enable growth of only the desired microbe/eukaryotic cell in large quantities for the manufacture of biotechnological products like antibiotics, vaccines, enzymes, etc.
Practice1 question
Try it now. A wrong answer costs nothing here, try again until you get it.
Which definition of biotechnology did the European Federation of Biotechnology give?
NCERT 9.1 quotes the EFB definition word for word: the integration of natural science and organisms, cells, parts thereof, and molecular analogues for products and services. Curd, bread and wine are examples of traditional microbe-mediated processes, not the definition.
Genetic engineering vs traditional hybridisation
Sexual reproduction provides opportunities for variations and formulation of unique combinations of genetic setup, some of which may be beneficial to the organism as well as the population. Asexual reproduction preserves the genetic information, while sexual reproduction permits variation. Traditional hybridisation procedures used in plant and animal breeding very often lead to inclusion and multiplication of undesirable genes along with the desired genes. The techniques of genetic engineering, which include creation of recombinant DNA, use of gene cloning and gene transfer, overcome this limitation and allow us to isolate and introduce only one or a set of desirable genes without introducing undesirable genes into the target organism.
What happens to a piece of DNA transferred into an alien organism? Most likely, this piece of DNA would not be able to multiply itself in the progeny cells of the organism. But when it gets integrated into the genome of the recipient, it may multiply and be inherited along with the host DNA. This is because the alien piece of DNA has become part of a chromosome, which has the ability to replicate. In a chromosome there is a specific DNA sequence called the origin of replication, which is responsible for initiating replication. Therefore, for the multiplication of any alien piece of DNA in an organism, it needs to be a part of a chromosome which has a specific sequence known as origin of replication. Thus, an alien DNA is linked with the origin of replication, so that this alien piece of DNA can replicate and multiply itself in the host organism. This can also be called cloning, or making multiple identical copies of any template DNA.
There are three basic steps in genetically modifying an organism:
- Identification of DNA with desirable genes.
- Introduction of the identified DNA into the host.
- Maintenance of introduced DNA in the host and transfer of the DNA to its progeny.
The first recombinant DNA: Cohen and Boyer, 1972
The construction of the first recombinant DNA emerged from the possibility of linking a gene encoding antibiotic resistance with a native plasmid (autonomously replicating circular extra-chromosomal DNA) of Salmonella typhimurium. Stanley Cohen and Herbert Boyer accomplished this in 1972 by isolating the antibiotic resistance gene by cutting out a piece of DNA from a plasmid which was responsible for conferring antibiotic resistance. The cutting of DNA at specific locations became possible with the discovery of the so-called molecular scissors, restriction enzymes. The cut piece of DNA was then linked with the plasmid DNA. These plasmid DNA act as vectors to transfer the piece of DNA attached to it. You probably know that the mosquito acts as an insect vector to transfer the malarial parasite into the human body. In the same way, a plasmid can be used as a vector to deliver an alien piece of DNA into the host organism. The linking of the antibiotic resistance gene with the plasmid vector became possible with the enzyme DNA ligase, which acts on cut DNA molecules and joins their ends. This makes a new combination of circular autonomously replicating DNA created in vitro, known as recombinant DNA. When this DNA is transferred into Escherichia coli, a bacterium closely related to Salmonella, it could replicate using the new host's DNA polymerase enzyme and make multiple copies. The ability to multiply copies of the antibiotic resistance gene in E. coli was called cloning of the antibiotic resistance gene in E. coli.
Restriction enzymes: discovery and naming

Genetic engineering or recombinant DNA technology can be accomplished only if we have the key tools: restriction enzymes, polymerase enzymes, ligases, vectors and the host organism.
In the year 1963, the two enzymes responsible for restricting the growth of bacteriophage in Escherichia coli were isolated. One of these added methyl groups to DNA, while the other cut DNA. The latter was called restriction endonuclease.
The first restriction endonuclease, Hind II, whose functioning depended on a specific DNA nucleotide sequence, was isolated and characterised five years later. It was found that Hind II always cut DNA molecules at a particular point by recognising a specific sequence of six base pairs. This specific base sequence is known as the recognition sequence for Hind II. Besides Hind II, today we know more than 900 restriction enzymes that have been isolated from over 230 strains of bacteria, each of which recognise different recognition sequences.
The convention for naming these enzymes is: the first letter of the name comes from the genus and the second two letters come from the species of the prokaryotic cell from which they were isolated, e.g. EcoRI comes from Escherichia coli RY 13. In EcoRI, the letter 'R' is derived from the name of the strain. Roman numbers following the names indicate the order in which the enzymes were isolated from that strain of bacteria.
Restriction enzymes belong to a larger class of enzymes called nucleases. These are of two kinds: exonucleases and endonucleases. Exonucleases remove nucleotides from the ends of the DNA, whereas endonucleases make cuts at specific positions within the DNA.
Palindromes and sticky ends

Each restriction endonuclease functions by inspecting the length of a DNA sequence. Once it finds its specific recognition sequence, it will bind to the DNA and cut each of the two strands of the double helix at specific points in their sugar-phosphate backbones (NCERT Figure 9.1). Each restriction endonuclease recognises a specific palindromic nucleotide sequence in the DNA.
Palindromes are groups of letters that form the same words when read both forward and backward, e.g. "MALAYALAM". As against a word-palindrome where the same word is read in both directions, the palindrome in DNA is a sequence of base pairs that reads the same on the two strands when the orientation of reading is kept the same. For example, the following sequence reads the same on the two strands in the 5' to 3' direction, and this is also true if read in the 3' to 5' direction:
- 5' - GAATTC - 3'
- 3' - CTTAAG - 5'
Restriction enzymes cut the strand of DNA a little away from the centre of the palindrome sites, but between the same two bases on the opposite strands. This leaves single stranded portions at the ends. There are overhanging stretches called sticky ends on each strand (NCERT Figure 9.1). These are named so because they form hydrogen bonds with their complementary cut counterparts. This stickiness of the ends facilitates the action of the enzyme DNA ligase.
Restriction endonucleases are used in genetic engineering to form recombinant molecules of DNA, which are composed of DNA from different sources/genomes. When cut by the same restriction enzyme, the resultant DNA fragments have the same kind of sticky ends, and these can be joined together (end-to-end) using DNA ligases (NCERT Figure 9.2). Normally, unless one cuts the vector and the source DNA with the same restriction enzyme, the recombinant vector molecule cannot be created.
Practice1 question
Try it now. A wrong answer costs nothing here, try again until you get it.
A DNA fragment cut by EcoRI has single stranded overhangs at its ends. What are these called, and what do they do?
NCERT 9.2.1: EcoRI cuts a little away from the centre of the palindrome site, leaving single stranded overhangs called sticky ends. They form hydrogen bonds with their complementary cut counterparts, and this stickiness facilitates the action of DNA ligase, which joins the fragments.
Gel electrophoresis and elution

The cutting of DNA by restriction endonucleases results in the fragments of DNA. These fragments can be separated by a technique known as gel electrophoresis. Since DNA fragments are negatively charged molecules, they can be separated by forcing them to move towards the anode under an electric field through a medium/matrix. Nowadays the most commonly used matrix is agarose, which is a natural polymer extracted from sea weeds. The DNA fragments separate (resolve) according to their size through the sieving effect provided by the agarose gel. Hence, the smaller the fragment size, the farther it moves.
The separated DNA fragments can be visualised only after staining the DNA with a compound known as ethidium bromide, followed by exposure to UV radiation (you cannot see pure DNA fragments in the visible light and without staining). You can see bright orange coloured bands of DNA in an ethidium bromide stained gel exposed to UV light (NCERT Figure 9.3). The separated bands of DNA are cut out from the agarose gel and extracted from the gel piece. This step is known as elution. The DNA fragments purified in this way are used in constructing recombinant DNA by joining them with cloning vectors.
Cloning vectors: plasmids and bacteriophages

Plasmids and bacteriophages have the ability to replicate within bacterial cells independent of the control of chromosomal DNA. Bacteriophages, because of their high number per cell, have very high copy numbers of their genome within the bacterial cells. Some plasmids may have only one or two copies per cell, whereas others may have 15-100 copies per cell. Their numbers can go even higher. If we are able to link an alien piece of DNA with bacteriophage or plasmid DNA, we can multiply its numbers equal to the copy number of the plasmid or bacteriophage. Vectors used at present are engineered in such a way that they help easy linking of foreign DNA and selection of recombinants from non-recombinants.
Features of a vector: ori, selectable marker, cloning sites
The following are the features that are required to facilitate cloning into a vector.
- (i) Origin of replication (ori): this is a sequence from where replication starts, and any piece of DNA when linked to this sequence can be made to replicate within the host cells. This sequence is also responsible for controlling the copy number of the linked DNA. So, if one wants to recover many copies of the target DNA, it should be cloned in a vector whose origin supports a high copy number.
- (ii) Selectable marker: in addition to ori, the vector requires a selectable marker, which helps in identifying and eliminating non-transformants and selectively permitting the growth of the transformants. Transformation is a procedure through which a piece of DNA is introduced in a host bacterium. Normally, the genes encoding resistance to antibiotics such as ampicillin, chloramphenicol, tetracycline or kanamycin, etc., are considered useful selectable markers for E. coli. The normal E. coli cells do not carry resistance against any of these antibiotics.
- (iii) Cloning sites: in order to link the alien DNA, the vector needs to have very few, preferably single, recognition sites for the commonly used restriction enzymes. Presence of more than one recognition site within the vector will generate several fragments, which will complicate the gene cloning (NCERT Figure 9.4). The ligation of alien DNA is carried out at a restriction site present in one of the two antibiotic resistance genes. For example, you can ligate a foreign DNA at the BamHI site of the tetracycline resistance gene in the vector pBR322. The recombinant plasmids will lose tetracycline resistance due to insertion of foreign DNA but can still be selected out from non-recombinant ones by plating the transformants on ampicillin containing medium. The transformants growing on ampicillin containing medium are then transferred on a medium containing tetracycline. The recombinants will grow in ampicillin containing medium but not on that containing tetracycline. But non-recombinants will grow on the medium containing both the antibiotics. In this case, one antibiotic resistance gene helps in selecting the transformants, whereas the other antibiotic resistance gene gets inactivated due to insertion of alien DNA, and helps in selection of recombinants.
Figure 9.4 shows pBR322 with restriction sites EcoRI, HindIII, BamHI, SalI, PvuI, PstI, PvuII and ClaI, ori and the antibiotic resistance genes ampR and tetR; rop codes for the proteins involved in the replication of the plasmid.
Practice1 question
Try it now. A wrong answer costs nothing here, try again until you get it.
Foreign DNA is ligated into the BamHI site of the tetR gene of pBR322, and the plasmid is put into E. coli. Which colonies are the recombinants?
NCERT 9.2.2 (pBR322): foreign DNA ligated at the BamHI site of the tetracycline resistance gene inactivates that gene. Recombinants lose tetracycline resistance, so they grow on ampicillin medium but not on tetracycline medium. Non-recombinants grow on both.
Insertional inactivation: blue-white screening
Selection of recombinants due to inactivation of antibiotics is a cumbersome procedure because it requires simultaneous plating on two plates having different antibiotics. Therefore, alternative selectable markers have been developed which differentiate recombinants from non-recombinants on the basis of their ability to produce colour in the presence of a chromogenic substrate. In this, a recombinant DNA is inserted within the coding sequence of an enzyme, beta-galactosidase. This results in inactivation of the gene for synthesis of this enzyme, which is referred to as insertional inactivation. The presence of a chromogenic substrate gives blue coloured colonies if the plasmid in the bacteria does not have an insert. Presence of insert results in insertional inactivation of the beta-galactosidase gene, and the colonies do not produce any colour; these are identified as recombinant colonies.
Vectors for plants and animals
We have learnt the lesson of transferring genes into plants and animals from bacteria and viruses, which have known this for ages: how to deliver genes to transform eukaryotic cells and force them to do what the bacteria or viruses want. For example, Agrobacterium tumefaciens, a pathogen of several dicot plants, is able to deliver a piece of DNA known as T-DNA to transform normal plant cells into a tumour and direct these tumour cells to produce the chemicals required by the pathogen. Similarly, retroviruses in animals have the ability to transform normal cells into cancerous cells. A better understanding of the art of delivering genes by pathogens in their eukaryotic hosts has generated knowledge to transform these tools of pathogens into useful vectors for delivering genes of interest to humans. The tumour inducing (Ti) plasmid of Agrobacterium tumefaciens has now been modified into a cloning vector which is no more pathogenic to the plants but is still able to use the mechanisms to deliver genes of our interest into a variety of plants. Similarly, retroviruses have also been disarmed and are now used to deliver desirable genes into animal cells. So, once a gene or a DNA fragment has been ligated into a suitable vector, it is transferred into a bacterial, plant or animal host (where it multiplies).
Competent host and gene transfer methods
Since DNA is a hydrophilic molecule, it cannot pass through cell membranes. Why? In order to force bacteria to take up the plasmid, the bacterial cells must first be made competent to take up DNA. This is done by treating them with a specific concentration of a divalent cation, such as calcium, which increases the efficiency with which DNA enters the bacterium through pores in its cell wall. Recombinant DNA can then be forced into such cells by incubating the cells with recombinant DNA on ice, followed by placing them briefly at 42°C (heat shock), and then putting them back on ice. This enables the bacteria to take up the recombinant DNA.
This is not the only way to introduce alien DNA into host cells. In a method known as micro-injection, recombinant DNA is directly injected into the nucleus of an animal cell. In another method, suitable for plants, cells are bombarded with high velocity micro-particles of gold or tungsten coated with DNA in a method known as biolistics or gene gun. And the last method uses disarmed pathogen vectors, which when allowed to infect the cell, transfer the recombinant DNA into the host.
Isolation of genetic material
Recall that nucleic acid is the genetic material of all organisms without exception. In the majority of organisms this is deoxyribonucleic acid or DNA. In order to cut the DNA with restriction enzymes, it needs to be in pure form, free from other macro-molecules. Since the DNA is enclosed within the membranes, we have to break the cell open to release DNA along with other macromolecules such as RNA, proteins, polysaccharides and also lipids. This can be achieved by treating the bacterial cells/plant or animal tissue with enzymes such as lysozyme (bacteria), cellulase (plant cells), chitinase (fungus). You know that genes are located on long molecules of DNA intertwined with proteins such as histones. The RNA can be removed by treatment with ribonuclease, whereas proteins can be removed by treatment with protease. Other molecules can be removed by appropriate treatments, and purified DNA ultimately precipitates out after the addition of chilled ethanol. This can be seen as a collection of fine threads in the suspension (NCERT Figure 9.5). DNA that separates out can be removed by spooling.
Practice1 question
Try it now. A wrong answer costs nothing here, try again until you get it.
Bacterial cells are treated with calcium ions, kept on ice with recombinant DNA, given a brief heat shock at 42°C and put back on ice. What is the purpose?
NCERT 9.2.3: DNA is hydrophilic and cannot pass through cell membranes. Treating bacteria with calcium ions makes them competent to take up DNA; incubating on ice, a brief heat shock at 42°C and back on ice lets the bacteria take up the recombinant DNA.
Cutting DNA at specific locations and ligation
Restriction enzyme digestions are performed by incubating purified DNA molecules with the restriction enzyme, at the optimal conditions for that specific enzyme. Agarose gel electrophoresis is employed to check the progression of a restriction enzyme digestion. DNA is a negatively charged molecule, hence it moves towards the positive electrode (anode) (NCERT Figure 9.3). The process is repeated with the vector DNA also.
The joining of DNA involves several processes. After having cut the source DNA as well as the vector DNA with a specific restriction enzyme, the cut out 'gene of interest' from the source DNA and the cut vector with space are mixed and ligase is added. This results in the preparation of recombinant DNA.
PCR: amplifying the gene of interest

PCR stands for Polymerase Chain Reaction. In this reaction, multiple copies of the gene (or DNA) of interest are synthesised in vitro using two sets of primers (small chemically synthesised oligonucleotides that are complementary to the regions of DNA) and the enzyme DNA polymerase. The enzyme extends the primers using the nucleotides provided in the reaction and the genomic DNA as template. If the process of replication of DNA is repeated many times, the segment of DNA can be amplified to approximately a billion times, i.e. 1 billion copies are made. Such repeated amplification is achieved by the use of a thermostable DNA polymerase (isolated from a bacterium, Thermus aquaticus), which remains active during the high temperature induced denaturation of double stranded DNA. The amplified fragment, if desired, can now be used to ligate with a vector for further cloning (NCERT Figure 9.6).
Each cycle of PCR has three steps: (i) Denaturation; (ii) Primer annealing; and (iii) Extension of primers (NCERT Figure 9.6).
Extra information (beyond NCERT): the standard temperatures used are about 94-95°C for denaturation, about 50-60°C for primer annealing, and 72°C for extension of primers by Taq polymerase.
Insertion of recombinant DNA into the host
There are several methods of introducing the ligated DNA into recipient cells. Recipient cells, after making them competent to receive, take up DNA present in their surrounding. So, if a recombinant DNA bearing a gene for resistance to an antibiotic (e.g. ampicillin) is transferred into E. coli cells, the host cells become transformed into ampicillin-resistant cells. If we spread the transformed cells on agar plates containing ampicillin, only transformants will grow; untransformed recipient cells will die. Since, due to the ampicillin resistance gene, one is able to select a transformed cell in the presence of ampicillin. The ampicillin resistance gene in this case is called a selectable marker.
Obtaining the foreign gene product: bioreactors

When you insert a piece of alien DNA into a cloning vector and transfer it into a bacterial, plant or animal cell, the alien DNA gets multiplied. In almost all recombinant technologies, the ultimate aim is to produce a desirable protein. Hence, there is a need for the recombinant DNA to be expressed. The foreign gene gets expressed under appropriate conditions. The expression of foreign genes in host cells involves understanding many technical details.
After having cloned the gene of interest and having optimised the conditions to induce the expression of the target protein, one has to consider producing it on a large scale. Can you think of any reason why there is a need for large-scale production? If any protein encoding gene is expressed in a heterologous host, it is called a recombinant protein. The cells harbouring cloned genes of interest may be grown on a small scale in the laboratory. The cultures may be used for extracting the desired protein and then purifying it by using different separation techniques.
The cells can also be multiplied in a continuous culture system wherein the used medium is drained out from one side while fresh medium is added from the other to maintain the cells in their physiologically most active log/exponential phase. This type of culturing method produces a larger biomass leading to higher yields of desired protein.
Small volume cultures cannot yield appreciable quantities of products. To produce in large quantities, the development of bioreactors, where large volumes (100-1000 litres) of culture can be processed, was required. Thus, bioreactors can be thought of as vessels in which raw materials are biologically converted into specific products, individual enzymes, etc., using microbial, plant, animal or human cells. A bioreactor provides the optimal conditions for achieving the desired product by providing optimum growth conditions (temperature, $\mathrm{pH}$, substrate, salts, vitamins, oxygen).
The most commonly used bioreactors are of the stirring type, which are shown in NCERT Figure 9.7. A stirred-tank reactor is usually cylindrical or with a curved base to facilitate the mixing of the reactor contents. The stirrer facilitates even mixing and oxygen availability throughout the bioreactor. Alternatively, air can be bubbled through the reactor. If you look at the figure closely, you will see that the bioreactor has an agitator system, an oxygen delivery system and a foam control system, a temperature control system, $\mathrm{pH}$ control system and sampling ports so that small volumes of the culture can be withdrawn periodically. In a sparged stirred-tank bioreactor, sterile air bubbles are sparged through the reactor.
Practice1 question
Try it now. A wrong answer costs nothing here, try again until you get it.
A gene for a human protein is expressed in E. coli and the protein is harvested. What is this protein called, and where is it made on a large scale?
NCERT 9.3.5: if a protein encoding gene is expressed in a heterologous host, it is called a recombinant protein. To produce it in large quantities, cells are grown in bioreactors, where large volumes (100-1000 litres) of culture can be processed.
Downstream processing
After completion of the biosynthetic stage, the product has to be subjected through a series of processes before it is ready for marketing as a finished product. The processes include separation and purification, which are collectively referred to as downstream processing. The product has to be formulated with suitable preservatives. Such formulation has to undergo thorough clinical trials as in case of drugs. Strict quality control testing for each product is also required. The downstream processing and quality control testing vary from product to product.
Table 1: Enzymes of recombinant DNA technology
| Enzyme | What it does | Where NCERT uses it |
|---|---|---|
| Restriction endonuclease | Cuts DNA at specific palindromic recognition sequences | Cutting vector and source DNA (Hind II, EcoRI) |
| DNA ligase | Joins cut DNA ends and seals sticky ends | Linking the gene to the plasmid vector |
| DNA polymerase (Taq) | Extends primers; thermostable, stays active at high temperature | PCR amplification |
| Lysozyme | Breaks open bacterial cells | Isolation of DNA |
| Cellulase | Breaks open plant cells | Isolation of DNA |
| Chitinase | Breaks open fungal cells | Isolation of DNA |
| Ribonuclease | Removes RNA | Purification of DNA |
| Protease | Removes proteins | Purification of DNA |
Exonucleases remove nucleotides from the ends of DNA; endonucleases cut within DNA. Both are nucleases.
Source: NCERT XII, Ch 9, 9.2.1, 9.3.1 and 9.3.3.
Table 2: Cloning vectors compared
| Vector | Host | Copy number or note |
|---|---|---|
| Plasmid, e.g. pBR322 | Bacteria (E. coli) | 1-2 copies per cell for some, 15-100 for others; carries ori, ampR and tetR |
| Bacteriophage | Bacteria | Very high copy number per cell |
| Ti plasmid (Agrobacterium tumefaciens) | Dicot plants | Modified, no longer pathogenic; delivers T-DNA |
| Retrovirus (disarmed) | Animal cells | Delivers desirable genes into animal cells |
Source: NCERT XII, Ch 9, 9.2.2.
Table 3: The three steps of PCR

| Step | What happens |
|---|---|
| 1. Denaturation | Double stranded DNA is denatured by high temperature |
| 2. Primer annealing | Two sets of primers anneal to complementary regions of DNA |
| 3. Extension of primers | DNA polymerase extends the primers using the nucleotides provided and genomic DNA as template |
Repeated many times, the segment of DNA is amplified to approximately 1 billion copies. Taq polymerase from Thermus aquaticus stays active at the high temperature of denaturation.
Source: NCERT XII, Ch 9, 9.3.3, Fig. 9.6.
Trap pairs: the confusions NEET tests
- Restriction enzyme vs DNA ligase: the restriction enzyme cuts DNA; DNA ligase joins the cut ends. The enzyme that cuts never joins.
- Exonuclease vs endonuclease: exonucleases remove nucleotides from the ends of DNA; endonucleases cut at specific positions within DNA.
- Ori vs selectable marker: ori is the origin of replication and controls copy number; the selectable marker (e.g. ampR) identifies transformants.
- Recombinant vs non-recombinant on tetracycline: recombinants (insert in tetR) grow on ampicillin but NOT on tetracycline; non-recombinants grow on both.
- Denaturation vs annealing in PCR: denaturation (high temperature, strands separate) is step 1; primer annealing is step 2; extension is step 3.
- Blue vs colourless colonies: blue colonies have no insert (beta-galactosidase active); colourless colonies are recombinants (gene inactivated by the insert).
- Competent vs normal E. coli: normal E. coli has no antibiotic resistance and cannot take up DNA; competent cells (calcium treated, heat shock at 42°C) can.
Trap Boxes
Restriction enzymes cut DNA anywhere?
Wrong idea: A restriction enzyme cuts a DNA molecule at random places.
Each restriction endonuclease recognises a specific palindromic recognition sequence and cuts at a particular point in it. Hind II, for example, recognises a specific sequence of six base pairs.
NCERT XII, Ch 9, 9.2.1
Sticky ends are joined by the restriction enzyme?
Wrong idea: The same restriction enzyme that cuts the DNA also joins the sticky ends.
DNA ligase joins the cut ends. The restriction enzyme only cuts; it never joins fragments together.
NCERT XII, Ch 9, 9.2.1
Ori is the antibiotic resistance gene?
Wrong idea: The origin of replication is the antibiotic resistance gene that selects transformants.
Ori is the origin of replication: the sequence from where replication starts, and it controls the copy number of the linked DNA. The selectable marker, such as ampR, only helps identify transformants.
NCERT XII, Ch 9, 9.2.2
Gel electrophoresis separates DNA by charge?
Wrong idea: DNA fragments separate in the gel because they carry different charges.
All DNA fragments are negatively charged and move towards the anode; they separate by size, and the smaller the fragment, the farther it moves through the agarose gel.
NCERT XII, Ch 9, 9.2.1
Denaturation is the last step of PCR?
Wrong idea: In PCR, denaturation comes after primer annealing and extension.
The order is denaturation first, then primer annealing, then extension of primers. Taq polymerase from Thermus aquaticus stays active at the high temperature of denaturation.
NCERT XII, Ch 9, 9.3.3
Chapter test
5 NEET PYQs. +4 for a correct answer, -1 for a wrong answer, exactly like NEET. Finish the test to earn a medal.
Q1: NEET (UG) 2023, Code F1, Q180
Which of the following is not a cloning vector?
YAC is a yeast artificial chromosome and BAC is a bacterial artificial chromosome; both are built to carry foreign DNA into a host, so both are cloning vectors, as is the plasmid pBR322. A probe is a labelled piece of DNA used to detect a sequence; it never carries or replicates DNA in a host.
Q2: NEET (UG) 2022, Code R1, Q102
Which one of the following statement is not true regarding gel electrophoresis technique?
Blue colonies on a chromogenic substrate are about insertional inactivation of beta-galactosidase, not gel electrophoresis. In gel electrophoresis, ethidium bromide stained DNA gives bright orange bands under UV light, and elution recovers the separated fragments from the gel.
Q3: NEET (UG) 2021, Code P3, Q157
During the process of gene amplification using PCR, if very high temperature is not maintained in the beginning, then which of the following steps of PCR will be affected first?
Denaturation is the first step of PCR: high temperature separates the two strands of DNA. Without it, primers cannot anneal and nothing else can follow.
Q4: NEET (UG) 2020, Code G5, Q80
The specific palindromic sequence which is recognised by EcoRI is
EcoRI recognises 5'-GAATTC-3' on one strand and 3'-CTTAAG-5' on the other. It is a palindrome: it reads the same on both strands when read in the same orientation.
Q5: NEET (UG) 2019, Code Q2, Q83
Which one of the following equipments is essentially required for growing microbes on a large scale, for industrial production of enzymes?
Large scale production of enzymes needs bioreactors: vessels of 100-1000 litres in which raw materials are biologically converted into products under optimum conditions of temperature, $\mathrm{pH}$, substrate, salts, vitamins and oxygen.
Score: 0 · Answered 0 of 5
Flashcards
Tap a card to flip it over and see the answer. Tap it again to flip it back.
What is the EFB definition of biotechnology?
Tap to flipThe integration of natural science and organisms, cells, parts thereof, and molecular analogues for products and services.
Tap to flip backName the two core techniques that enabled modern biotechnology.
Tap to flipGenetic engineering: techniques to alter the chemistry of genetic material (DNA and RNA), introduce it into host organisms and change the phenotype of the host. Bioprocess engineering: maintenance of a sterile, microbial contamination-free ambience in chemical engineering processes so only the desired microbe or cell g
Tap to flip backWhich was the first restriction endonuclease, and how long is its recognition sequence?
Tap to flipHind II. It recognises a specific sequence of six base pairs, and it always cuts DNA at a particular point in that sequence.
Tap to flip backWhat is the recognition sequence of EcoRI?
Tap to flip5'-GAATTC-3' on one strand and 3'-CTTAAG-5' on the other. It reads the same on the two strands when the orientation of reading is kept the same, so it is a palindromic sequence.
Tap to flip backPut the steps of recombinant DNA technology in order: insertion into host, cutting with restriction enzyme, isolation of DNA, ligation into vector, extraction of product, culturing at large scale.
Tap to flipIsolation of DNA, cutting (fragmentation) with a restriction enzyme, isolation of the desired DNA fragment, ligation of the fragment into a vector, transferring the recombinant DNA into the host, culturing the host cells on a large scale, extraction of the desired product.
Tap to flip backHow do exonucleases and endonucleases differ?
Tap to flipExonucleases remove nucleotides from the ends of the DNA. Endonucleases make cuts at specific positions within the DNA.
Tap to flip backIn pBR322, what happens when foreign DNA is ligated at the BamHI site of the tetracycline resistance gene?
Tap to flipThe recombinant plasmid loses tetracycline resistance. Recombinants grow on ampicillin medium but not on tetracycline medium; non-recombinants grow on the medium containing both antibiotics.
Tap to flip backWhy is the DNA polymerase used in PCR taken from Thermus aquaticus?
Tap to flipIt is thermostable: it remains active during the high temperature induced denaturation of double stranded DNA, so the same enzyme survives cycle after cycle of PCR.
Tap to flip backWhat does the origin of replication (ori) control, and what does the selectable marker do?
Tap to flipOri is the sequence from where replication starts, and it controls the copy number of the linked DNA. The selectable marker (for example ampR) helps in identifying and eliminating non-transformants and selectively permits the growth of transformants.
Tap to flip backWhat volume of culture can a bioreactor process, and what conditions does it provide?
Tap to flip100-1000 litres. It provides optimum growth conditions: temperature, $\mathrm{pH}$, substrate, salts, vitamins and oxygen. It has an agitator system, an oxygen delivery system, a foam control system, a temperature control system, a $\mathrm{pH}$ control system and sampling ports.
Tap to flip back